View PT-10B8GPO_4299281.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PT-10B
* PIN/TIA receiver
Product Bulletin (Preliminary) * February 2002
* High data rate, up to 10.7 Gb/s * Broad wavelength range, 750-1650 nm * 50 m or 62.5 m multimode fiber input with SC or FC * High sensitivity, -17 dBm @ 850 nm * GPO output connector
The PT-10B is a single-output receiver module for 10 Gb Ethernet, Fiber Channel and VSR OC-192 transmission system receive applications up to 10.7 Gb/s. It couples a high responsivity, front-illuminated PIN photodiode, usable from 750 nm to 1650 nm, with an internal transimpedance gain stage of 500 V/A. This combination produces a receiver with a 9 GHz bandwidth and conversion gain of 450 V/W at 1310 nm. The single-coaxial output module is available with either an SMAor GPO output connector in a compact, 8-pin butterfly package with multimode fiber input. The receiver meets Telcordia GR-468 qualification standards.
1 2
Specifications
Wavelength range Bandwidth (-3dB electrical) Low frequency cutoff1 Sensitivity @ 850 nm2 Sensitivity @ 1310 nm2 Overload @1310 Responsivity @ 850nm Responsivity @ 1310 nm Transimpedance gain Output Return Loss (< 8 GHz) Optical Return Loss Power dissipation
Minimum
750 8 DC
Typical
9 -17 -20
Maximum
1650
Units
nm GHz kHz
-15 -18
dBm dBm dBm A/W A/W
0 0.5 0.85 400
+1 0.55 0.9 500 -12 -10 -14 1.0
dB dB W
DC Electrical
Photodiode voltage Amplifier voltage +9 +7.75 +10 +8 +12 +8.25 V V
Mechanical
Package type Operating temperature Storage temperature
Output is DC coupled 10 -10 BER, PRBS 223-1
8-pin butterfly with GPO 0 -40 +70 +85 C C
True DC Output Option
The PT-10B is available with optional dual power supplies, which
Eye pattern taken at 10 Gb/s data rate with -7 dBm optical input power.
enables adjustment and/or stabilization of the DC output to enable accurate extinction ratio measurements.
PT-10B
Product Specifications
.100 TYP. .015.003 TYP.
4X #2-56
CLEARANCE SLOT (o.095)
0
Electrical (dB)
8
5
-3
.354
1 4
.500
-6
-9
-12
0
2
4
6
8
10
12
14
.725 1.511
Frequency (GHz)
Single-mode fiber with 900m buffer (1 meter typical)
.520
.235 .060
.344 .211
.881
Pin Description 1 2 3 4
1
Pin Description 5 6 7 8 NC NC NC NC
NC (or DC Mon1) VPD VAMP GND (or VNEG1)
Application Notes
Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. Temperature and fiber restrictions are as follows: Lead soldering: 250C for no more than 10 seconds Fiber feed-through tube: 120C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device.
If ordered with true DC output option
PT-10B Ordering Information
Base model
Option format Package option Fiber diameter options (m) Fiber connector options
PT-10B
/Package/Fiber diameter/Fiber connector 8SMA or 8GPO 50 or 62.5 FC or SC
Quality Vision
As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements.
PT-10B
Picometrix, Inc. * PO Box 130243
Ann Arbor, MI * 48113-0243 734-998-4501 * 734-998-3474 fax www.picometrix.com
(c) 2002 Picometrix, Inc. All rights reserved. Specifications and output data subject to change without notice. PB-PT-10B-0202-A

▲Up To Search▲

Price & Availability of PT-10B8GPO

	To Download PT-10B8GPO Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .